Clear all

Big uas mapping gcp and terrain

17 Posts
8 Users
Posts: 1475
Member Member


The TDL should be set to Repeater 1.

The GNSS receiver base should be set to Base with 1 Repeater.

Posted : September 23, 2022 6:08 am
Posts: 477
Member Member

Another option besides fighting a radio is set up an air-link raven modem at the base you can configure it with a static ip and port address. Then use a cell phone or wifi at rover end. Just like a server if you have cell coverage you can go further than the r8 will be able to resolve the interger. Anyway. You could post the ip and port here and we could connect in the states just never would fix is all. You could do this with the old tsc2 and survey controller software pre Trimble access. Make the base act like a single base network is all. 

Posted : September 23, 2022 2:29 pm
Page 2 / 2