Connecting EMLID RS2 thru Blue tooth to the TDS Survey Pro V4.2.1
I currently use Tripod Data Systems Survey Pro application version 4.2.1 that I run on a Trimble TSC2 Data Collector, works great with my total station. However, I recently purchased the Emlid RS2 for running as a base and rover system, and when I try to connect the RS2's bluetooth output from the rover to the Survey Pro GNSS input, I am unable to see the RS2. The Survey Pro program has a pull down menu which list several different input sources (Trimble, Leica Sokkia, Thales, Topcon, & Novatel) along with their different device models. My question is there an update for the Survey Pro that will allow my RS2's NMEA output to be recognized?
I'm using fieldgenius with reach2 as a rover to connect to CORS. I use NMEA via Bluetooth settings to receive corrections to my data collector. I bet this could be the same for survey pro.
Configure first the rs2-data collector Bluetooth connection then NMEA settings on survey pot.
I hope this can work for you.