Trimble 4000 4400 7400 Manuals and Software DATM4000 wanted
I am playing a bit around with old Trimble 4000SSI, 4400 and 7400MSI GPS receiver. Trying to make some RTK connection between them possible and install other Datum then WGS84. Software is running and Firmware is also good did internal Battery replacement and Firmware reloaded.
I have already looked at:
Series 4000 Application Guide, Series 4000 Receiver Reference Manual, 4000SSi User Guide, Remote Controller Software User Guide
I am looking for any Manuals about 4400 and 7400MSI (just found 7400RSi & 7400DSi brochure).
Also there must be a Programm “DATM4000” to put a local Datum at 4000 Reciever. I am also looking for that Programm. Maybe anybody still has this old Manual?
Manual says:
“A receiver can hold definitions of only one local datum and one local zone at a time. To change them, you must connect the
receiver to a computer and run the DATM4000 program.”“You select a local datum and local zone by running the program DATM4000 on a personal computer that is connected to one of your
receiver’s serial ports. This program is described in Local Datum and Zones Option: Software Release Notes.”“24122-00 DATM4000 software; downloads configurations for the Local Datum/Zones feature.”
Log in to reply.