Share:
Notifications
Clear all

Magnet Office to Civil3D Export Issues

charles_phillips
(@charles_phillips)
FNG Member

Hello All,

Recently it has been brought to my attention that while exporting a .mjo to a .dwg in Magnet Office, the file loses some of its cogo values. The points are imported into the .dwg with a northing, easting, and elevation... but no point number or code value. Has any one else experienced this issue and potentially have a workaround? I've been deleting the points while keeping the linework and just re-importing the points via .csv but would like to avoid this extra step. Any help would be greatly appreciated!

Quote
Topic starter Posted : February 14, 2022 8:51 am
VA LS 2867
(@va-ls-2867)
200+ posts Member

Export the points as a comma delimited text file and import into C3D.

ReplyQuote
Posted : February 14, 2022 10:07 am
charles_phillips
(@charles_phillips)
FNG Member

@va-ls-2867 as I stated before, that's what I am currently doing.

ReplyQuote
Topic starter Posted : February 14, 2022 10:20 am

Squirltech
(@squirl)
1,000+ posts Supporter

Double check that the point and label styles being assigned to the points have point number and code assigned to them.

Otherwise, try what @va-ls-2867 suggests.

ReplyQuote
Posted : February 14, 2022 10:58 am
Share: