Activity Feed › Discussion Forums › Software, CAD & Mapping › What Antenna do you use in OPUS for an R10?
What Antenna do you use in OPUS for an R10?
Posted by Skeeter1996 on May 12, 2017 at 4:27 amOPUS doesn’t have an antenna type for an R10. Which one do you substitute?
bill93 replied 2 years, 4 months ago 9 Members · 10 Replies- 10 Replies
Ahhh, yes they do:
TRMR10 NONE L1/L2/L5….
It’s right above TRMR2
Skeeter1996, post: 427951, member: 9224 wrote: OPUS doesn’t have an antenna type for an R10. Which one do you substitute?
you should run your opus data thru the trimble portal (I have an r10)
https://www.myconnectedsite.com/site/surveyadministration/TrimbleAccessTools/Data%20ProcessingYou should also be aware that OPUS references the ARP, which is the bottom of the receiver, NOT the bottom of the quick release. If you’re using the quick release on a 2m fixed height pole or tripod your OPUS HI is 2.05m
Lee D, post: 428003, member: 7971 wrote: You should also be aware that OPUS references the ARP, which is the bottom of the receiver, NOT the bottom of the quick release. If you’re using the quick release on a 2m fixed height pole or tripod your OPUS HI is 2.05m
I wondered where the .05 came from. The quick release is over .05 feet long though isn’t it?
0.05 m = 5 cm = 0.164 foot.
Lee D, post: 428003, member: 7971 wrote: You should also be aware that OPUS references the ARP, which is the bottom of the receiver, NOT the bottom of the quick release. If you’re using the quick release on a 2m fixed height pole or tripod your OPUS HI is 2.05m
And this…is very good info folks
StLSurveyor, post: 428065, member: 7070 wrote: And this…is very good info folks
+1…..VERY GOOD information!!
T. Nelson – SAM, LLCThis is a long shot, but anyway… We use Topcon Tools/Magnet Tools for processing, and now we added some R10’s to the mix. Tools supports the R10, but I can’t figure out if Tools thinks the R10 has the quick adapter on it or not. I’m guessing it doesn’t….?
I’d want to do a comparison on the same mark versus a unit that I knew.
.
Log in to reply.