Share:
Notifications
Clear all

[Solved] Connecting TSC3 controller to SPS 930 total station via Radio

tmm26er
(@tmm26er)
10+ posts Member

 

Hello folks,

I am extremely baffled as to why my TSC3 controller can't connect to my SPS 930 via radio. I am positive that I have all the radio channel and network ID settings correctly entered on the SPS 930. I am able to connect via Bluetooth, however this is no good in the field where I often need to be hundreds of feet away from the total station.

 

I have tried connecting via radio in both siteworks and SCS 900, with no luck.

 

Has anyone else had an issue connecting to the SPS 930 via radio? If so, could you kindly share with me how you resolved the issue?

 

Thank you so much!

 

Tony

 

This topic was modified 5 months ago 3 times by tmm26er
Quote
Topic starter Posted : February 11, 2022 9:09 am
R S Mayer
(@r-s-mayer)
50+ posts Member

Does the TSC3 have a 2.4ghz radio installed? I don't see an antenna sticking out from the top of the controller. Provide a picture of the back of the controller if your unsure.

ReplyQuote
Posted : February 11, 2022 12:43 pm
tmm26er liked
Rover83
(@rover83)
1,000+ posts Member
Posted by: @r-s-mayer

Does the TSC3 have a 2.4ghz radio installed? I don't see an antenna sticking out from the top of the controller. Provide a picture of the back of the controller if your unsure.

Yeah, even if the radio module is installed, you're still gonna need that antenna...

ReplyQuote
Posted : February 11, 2022 12:59 pm
tmm26er liked

tmm26er
(@tmm26er)
10+ posts Member

@r-s-mayer 

Thank you so much R S Mayer! You have cleared it up for me! I assumed the TSC3 had an in-built 2.4ghz radio, but it does not. It totally would have had an antenna if that were the case!

 

Thanks again!

This post was modified 5 months ago by tmm26er
ReplyQuote
Topic starter Posted : February 11, 2022 1:05 pm
tmm26er
(@tmm26er)
10+ posts Member

@rover83 

Thank you Rover83!

ReplyQuote
Topic starter Posted : February 11, 2022 1:06 pm
Share: