Share:
Notifications
Clear all

Leica data cable

Sergeant Schultz
(@sergeant-schultz)
500+ posts Member

Good morning-

I'm looking for the pin-outs for the DB-9 end of a Leica data cable (TCRP1203)  I think it's 3,4 RX, TX; 5 ground, 9 positive but I'd like confirmation.

Thanks!

Quote
Topic starter Posted : August 6, 2022 4:36 am
hpalmer
(@hpalmer)
200+ posts Supporter

on pg 1314 of the technical reference manual.  not sure if this is what you are looking for

Pin Assignments and Sockets TPS1200 
Pin assignments for
port 1
Sockets
Pin Name Description Direction
1 PWR_IN Power input, + 12 V nominal (11 - 16 V). In
2 - Not used. -
3 GND Single ground. -
4 Rx RS232, receive In
5 Tx RS232, transmit Out
Port 1: LEMO-0, 5 pin, LEMO ENA.OB.305.CLN

 

or on page 1316

Pin Assignments and Sockets TPS1200 
Pin assignments for
8 pin LEMO-1
Sockets
Pin Name Description Direction
1 USB_D+ USB data line In or out
2 USB_D- USB data line In or out
3 GND Signal ground -
4 RxD RS232, receive data In
5 TxD RS232, transmit data Out
6 ID Identification pin In or out
7 PWR Power input, 5 -28 V In
8 ATX_ON ATX on control signal, RS232 levels In
8 pin LEMO-1: LEMO-1, 8 pin, LEMO HMI.1B.308.CLNP

ReplyQuote
Posted : August 6, 2022 6:52 am
Sergeant Schultz
(@sergeant-schultz)
500+ posts Member

@hpalmer I'm looking for the other end of the cable @ the DB-9

ReplyQuote
Topic starter Posted : August 6, 2022 1:40 pm

Share: